Table of Contents
Advertisement
machine deScription
front, rear, left and right
This manual refers the front, rear, left and
right of the machine as seen when sitting in
the operator's seat with the dozer blade
visible to the front.
deSignated operationS
Use this machine primarily for the following
operations:
• Excavation
• Digging ditches
• Digging side ditches
• Leveling
• Loading
featureS
• "Flexible machine width mechanism" for
crawler width
• Low engine noise and exhaust emissions
break-in period
When the machine is new, operate the
machine for the first 100 hours (as indicated
on the hour meter) by following the
instructions below.
Using a new machine without a break-in
period will lead to quicker deterioration of
machine performance and may shorten the
machine's service life.
• Sufficiently warm up the engine and
hydraulic oil.
• Avoid heavy loads and rapid operations.
Operate with a load of about 80% the
maximum load.
• Do not abruptly start up, accelerate,
change directions, or stop unless
necessary.
0-3
Advertisement
Table of Contents
Need help?
Do you have a question about the TB216 and is the answer not in the manual?
Questions and answers
where do I find out how to attach an auger to the tb216 excavator? What hose sizes, couplers, where to attach the hoses, what type of ends, do I have to add oil, how to keep air out of the lines