TroubleshooTing
reStarting after adding fuel
reStarting after adding
fuel
bleeding air from the fuel SyStem
IMPORTANT: NEVER use the starter
motor to crank the engine in order to
prime the fuel system. This may cause the
starter motor to overheat and damage the
coils, pinion gear and/or ring gear.
1. Add fuel.
2. Open the valve (2) of the water separator
and the fuel filter.
3. Turn the starter key to the ON position and
hold it for about 60 seconds.
The automatic air bleeder bleeds air from
the fuel system.
Note: Air in the fuel system causes the
engine to fail to start or to have other
problems. Always bleed air when the fuel
tank is emptied or when there is air in the
fuel system.
6-8