Design And Function - HBS CI 03 Operating Manual

8 Design and Function

8 Design and Function
The body of the stud welding gun consists of a sturdy two-part plastic housing (2).
The connecting line (3) (welding cable and control cable) is supplied through the
gun handle to the gun.
Positioned at the front of the stud welding gun are the welding piston and the retai-
ning nut used to fix the manual chuck.
At the front of the stud welding gun, the gun head (5) and the spacer (6) are ins-
talled.
At the rear, there is the mechanism for spring force adjustment (1).
At the front of the stud welding gun handle, the welding gun trigger (4) is installed.
It is used to trigger the welding process.
The serial number can be found on the welding gun handle.
Type plate
The type plate contains the following information:
– Manufacturer
– Type
The serial number is stamped.
16 ©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – full or partial reproduction subject to prior approval of the manufacturer