Solars - Orlanski ORLIGNO 100 16kW User And Service Manual

13.2 Solars

Solar collectors are supported only by enlargement module I/O number 5th. After performing all
the connections you must configure the controller to work with collectors proceed as described
below. The first step is to enable module number 5.
From the main menu select SETTINGS
Then in the mode SERVICE enter the access code
After inputting the correct code, run the MODULES CONFIGURATION
Find Module 5 and activate it by changing the settings to YES
Now enable the solar handling. As the main menu select SETTINGS and then enter the access
code in the SERVICE mode
58