12.5.4.1 Module configuration
Menu is used to configure the CAN network. In the menu, select the modules that are connected
to the system.
WARNING!
A detailed description of the modules and their destination are described in the manu-
al of expansion modules.
Module
Module no. 0
Module no. 1
Module no.2
Module no 3
Module no 4
Module no 5
Module no 6
Module no 7
Module Lambda
SUMMARY OF THE EXPANSION MODULES
3 heating circuits of the numbers 2,3,4.
Outdoor temperature sensor.
3 heating circuits of the numbers 5,6,7.
3 heating circuits of the numbers 8,9,10.
3 heating circuits of the numbers 11,12,13.
3 heating circuits of the numbers 14,15,16..
Buffer.
Solar collectors.
Hot water no. 2.
Return temperature sensor.
Not used.
Not used.
Module of the Lambda sensor.
Description
43