Before Starting Of The Burner It Is Necessary - Orlanski ORLIGNO 100 16kW User And Service Manual

5.5. Before starting of the burner it is necessary:

1. Check installation condition.
2. Fill in pellet to the tank.
3. Check if fuel contains any unwanted elements ( rocks, metal elements).
4. Connect burner's and feeder's plugs.
5. Turn on controller.
6. Feed fuel (SIMPLE MENU: Feed fuel: Yes) from the tank till it shows up on a burner.
ATTENTION!
Elastic pipe connected between burner and feeder must be under 45° angle so that
pellets drops feely to the burner!
7. Turn off fuel feed and hold ON/OFF
8. Burner maintenance after heating season:
- turn off and disconnect from power supply
- clean thoroughly
- remove pellet from tank (clean fixing pipe from remaining pellet ash)
- clean burner
button - boiler starts automatic lightning up.
19