Settings; Service - Orlanski ORLIGNO 100 16kW User And Service Manual

12.6.2. Settings

Function
Feed fuel now
Burner on
Fuel type

12.6.3. Service

WARNING!
Access the service is intended only for qualified technical personnel. The changes may
cause malfunction of the system.
Function
Air MIN (20%)
Air MAX (100%)
Feeding MAX (100%)
Power MIN (FL2)
Power MAX (FL2)
Modulation type
Photo threshold
Igniter test*
Heater feeder test*
Storage feeder test*
Blower test*
Test fuel mass
Fuel calorific value
Lambda control
Oxygen MIN (20%)
Oxygen MAX (100%)
Fuel start dose
Fire up blower power
* testing equipment in the menu "BURNER" is only possible when the controller is in the OFF mode.
Starts fuel feeding screw regardless of other features.
Consent to work of the burner.
Specifies the type of fuel.
Minimum amount of air during modulation where power of
burner is 20% or power number is 1.
Maximum amount of air during modulation where power of
burner is 100% or power number is 2.
Maximum time during fuel feeding when power of modula-
tion is 100% or power number is 2 on every 20 seconds.
Minimal burner power during modulation.
Maximal burner power during modulation.
Burner mode, power modulation or two power levels.
Brightness in the the burner over which is recognized as a
fire.
Turn on igniter for testing.
Turn on burner feeder for testing.
Turn on storage feeder for testing.
Turn on blower for testing.
Fuel mass obtained during continuous fuel feeder work
through 1 hour (in kg).
Fuel calorific value (in kWh/kg).
Determine whether regulator consider or not oxygen con-
centration.
Oxygen target for minimal power.
Oxygen target for maximal power.
Feeding time in order to iqnite fuel.
Fan power during light up
Description
Description
45