8. Connection - electric scheme
The device supply voltage is ~ 230V/50Hz. Plug the power cord to the controller in accordance with
the posted signs.
WARNING!
External sensors for installation control such as hot domestic water HW1 or central
heating CH1 are an option. They are not included in standard Orligno 100 package.
Attach to the controller for operating the boiler sensors and actuators as needed. The drawings
shows the connection scheme of equipment. In the tables, a description of the inputs and out-
puts.
WARNING!
Under no circumstances connect the protective conductor (PE) with a neutral (N).
WARNING!
Wiring must be done with the device disconnected from the mains.
Connections should be exercised by a person possessing adequate powers in this regard.
24