Lcd Brightness; Pair/Unpair - VTech VM321 User Manual

Parent unit settings

LCD brightness

You can change the brightness of the parent
unit screen.
To set the brightness of the parent unit screen:
Press MENU/
1.
2. Press
/VOL +
press
MENU
3. Press
/VOL +
brightness of the parent unit screen changes as you scroll
through the choices.
4. Press
MENU

Pair/Unpair

You can pair a maximum of four baby units to your
parent unit.
To pair a baby unit:
Press MENU/
1.
2. Press
/VOL +
press
MENU
Press MENU/
3.
4. Press
/VOL +
then press
press both
indicator flashes Red and White light alternately. Then
press and hold
at the same time.
white alternately.
5. When pairing is successful, the screen displays the newly
paired baby unit. The
red when it is powered by battery or turns white when it is
powered by AC power.
Any new baby unit paired to an occupied baby unit slot will
unpair the current baby
when the parent unit is not in use.
SELECT
to choose LCD BRIGHTNESS, then
or
/VOL -
/SELECT.
or to scroll through the choices, the
/VOL -
/SELECT to confirm your selection.
when the parent unit is not in use.
SELECT
to choose PAIR/UNPAIR, then
or
/VOL -
/SELECT.
again to choose PAIR CAM.
SELECT
or to choose the desired baby unit slot,
/VOL -
/SELECT. The screen displays Please
MENU
[ ] and [+] key on CAM side until POWER
and +
for 5 seconds on the new baby unit
on the new baby unit flashes red and
light on the new baby unit turns
unit.
22