View; Talk To The Baby Unit; Night Vision - VTech VM321 User Manual

Parent unit operation

View

You can change the screen to view the video
from different baby units. When the screen
is turned off and VOX mode is set to On, the
screen turns on for 30 seconds whenever
any sounds is detected by the baby units
and then turns off automatically.
To view different baby units:
Press to scroll to the desired baby units. Baby units
are in chronological order: CAM1, CAM2, CAM3, CAM4 and
all-CAM mode.
To turn the screen on or off:
• Press and hold
• When the screen is turned off, press

Talk to the baby unit

You can broadcast messages from the parent unit to the
speakerphone of the desired baby unit.
To talk to the baby unit:
1. Press
Press and hold TALK when the parent unit is in single-CAM
2.
view mode. Speak towards the MIC (microphone) on the
parent unit. The TALK light is on when the voice connection
to the baby unit is made. Your voice is broadcast to the
baby unit.
The TALK feature does not work in all-CAM mode.
•
If the speakerphone volume of the parent unit is set to OFF, it will
•
be reset to the default volume when you press and hold TALK.
• Lullaby playback is paused when the parent unit is talking the
baby unit in TALK mode. Lullaby playback resumes when the
parent unit finishes using the TALK feature.
Night vision
When the baby unit is turned on in a dark room, the baby unit
automatically uses its infrared LEDs to transmit a clear image of
baby to parent units, so you can monitor your baby at night.
However, images transmitted from the baby unit's infrared LEDs
are in black and white only.
for 2 seconds to turn off the screen.
to choose the desired baby unit.
26
to turn it on.