Baby Unit Installation - VTech VM321 User Manual

Getting started

Baby unit installation

Install the baby unit as shown below.
Make sure that the power outlet is not controlled by a wall
switch. Keep the power adapter cord away from children's
reach and bundle the adapter cord neatly with the attached
self-adhesive strap.
Baby unit
• Use only the baby unit power adapters supplied with this
product. To order a replacement, visit our website at
www.vtechbabymonitors.com or call 1 (800) 595-9511.
In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
• The baby unit power adapters are intended to be correctly
oriented in a vertical or floor mount position. The prongs are
not designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
Power outlet not
controlled by a
wall switch
Self-adhesive strap
Warning tag
7
Baby unit
power adapter