VTech VM321 User Manual page 5

Warning
Read this user manual carefully before you use the product and save it
for future reference.
1. This baby monitor is intended as an aid. It is not a substitute for
responsible and proper adult supervision and should not be used
as such.
2. Never immerse any part of the baby monitor in water or any
other liquid.
3. Check that the voltage indicated on the included power adapters
corresponds to the voltage of your power outlets before you
connect the product.
4. Only use the included power adapters to connect the parent and
baby units to your power outlets.
5. Do not cut off the power adapters to replace them with other plugs,
as this causes a hazardous situation.
6. If the power adapters are damaged, please only replace them
with the same type in order to avoid a hazard. For the correct
type of power adapter, please visit our website at
www.vtechbabymonitors.com or call 1 (800) 595-9511. In Canada,
go to www.vtechcanada.com or call 1 (800) 267-7377.
7. Never use the baby monitor in moist places or close to water.
8. In order to prevent electric shock, do not open the housing of the
baby unit or parent unit except for the battery compartment covers.
Except for the battery compartments, do not open the housing of
the baby units or parent unit in order to prevent electric shock.
9. The product is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
10. Children should be supervised to ensure that they do not play with
the product.
11. Use only the specified type of battery. To purchase replacement
battery, visit our website at www.vtechbabymonitors.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
12. If the product will not be used for a long time, unplug the power
adapters from the wall outlets, and unplug the rechargeable battery
packs from the parent units.
13. Unplug the power cords before replacing batteries.
iv