Installation - Vemer Iride User Manual

Keyboard
■
The keys carry out different functions on the basis of the device status and they will be
described step by step in this user manual.
Multipurpose keys are not built into the instrument, that is to say contemporary
pressures of 2 or more keys.
There are two types of pressure:
- brief pressure
- long pressure, with duration higher than 3 seconds
During the press of a button, the display is blue.
Attention: press the keys with your fingers; do not use sharp objects!
Attention: the keys are not active until the instrument is not correctly
inserted in the flush-mounting box.
Cleaning the display
■
To clean the display use a soft, lint-free cloth, without using excess force.
• The chronothermostats of Iride series are designed for flush-mountig on 3 modules
box (503 type).
• The chronothermostats must be installed at a height at about 1.5 m above the floor,
away from direct sunlight, away from doors, windows, heat sources, locations with
excess or total lack of ventilation.
• Install the white or anthracite grey cover according to your preferences by hooking
it to the cogs of the device
• Make the connections by respecting the diagrams described in this manual.
• Fix the device inside the 3 modules box in compliance with the assembly diagrams
described at the beginning of this instruction sheet. The accessories for the
installation included in the package allow the mounting of the plates described in

INSTALLATION

- 21 -
Iride Chronothermostat User Manual