To use the HAC telephone, follow these steps:
1. Switch your hearing aid to the Telecoil program
2. Pick up the telephone and place a call or answer a call
3. Hold the telephone close to the hearing aid, and tilt it slightly outwards
4. Listen to the dial tone and move the telephone to get the best reception
5. If needed, adjust the volume
6. When you hang up, switch to your preferred program
i
NOTE: If the phone has a poor telecoil signal, use the microphone program. To avoid whistling, do
not hold the handset too tightly against your ear.
NOTE: Ask your hearing care professional to enable the Telecoil program in your hearing aids.
NOTE: If you see a "M3", "M4", "T3", or "T4" on the box, then the smartphone is HAC compliant.
NOTE: If you find it difficult to obtain a good result while using your smartphone, your hearing care
professional will be able to give you advice on available wireless accessories to enhance listening
capabilities.
NOTE: Ask your smartphone dealer or hearing care professional for advice regarding HAC smart-
phones.
21