Table of Contents
Advertisement
RUGGEDCOM RSG2488
Installation Guide
Certification
The RSG2488 device has been thoroughly tested to guarantee its conformance with recognized standards and
has recieved approval from recognized regulatory agencies.
•
Section 6.1, "Agency Approvals"
•
Section 6.2, "FCC Compliance"
•
Section 6.3, "EMI and Environmental Tests"
Section 6.1
Agency Approvals
The RSG2488 has received approval from various agencies.
Table 9: Agency Approvals
Agency
FCC
CE
TUV
Industry Canada (IC)
Section 6.2
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference on his own expense.
Agency Approvals
Standards
FCC Part 15
EN 55022, EN 61000-3-2, EN 61000-3-3,
EN 61000-6-2, EN 60950-1, EN 60825-1
IEC 60950-1, EN 60950-1, CSA/UL 60950-1
ICES-003
Certification
Comments
Class A for USA
EU directives include 2004/108/
EC (EMC Directive) and 2006/95/
EC (Low Voltage Directive)
International Safety Compliance
Class A for Canada
Chapter 6
31
Advertisement
Table of Contents
