Advertisement
Assembly Instructions
Before you begin, please make sure all parts and proper quantities
are included. Any parts damaged during shipment must be reported
within 15 days of receipt. To report information regarding damage, to
purchase parts or accessories, or if you have any questions, please
contact us at:
www.spectrumfurniture.com
715-723-6750, 800-235-1262
Thank you for purchasing Spectrum products!
(20) 0101382
#14 x 7/8" PHSM screws
1. Attach leg mechanisms
1. Place worksurface face-down onto a non-abrasive surface.
2. Orient the leg mechanisms and release handle as shown and
align with the worksurface mounting holes. Figure 1A.
3. Attach the leg mechanisms and release handle to the worksurface
using (20) #14 x 7/8" PHSM screws and tighten securely.
4. Secure the cables to the worksurface with the included clips, (4)
#8 x 3/4" PHSM screws, and pre-drilled holes. Figure 1B.
attach leg mechanisms
to worksurface with
#14 x 7/8" PHSM screws
worksurface
Figure 1A
Important
cables
Flex Flip Tables
24"D
37310 - 48"W
37312 - 60"W
37314 - 72"W
leg mechanism
release
handle
Figure 1B
30"D
37311 - 48"W
37313 - 60"W
37315 - 72"W
secure cables with (4) PHSM
screws & cable clips
(included with table legs)
cable
cable clip
0108517R3 Page 1 of 3
Phillips
Screwdriver
Hex wrench
(included
with legs)
1/2" wrench
Advertisement
Table of Contents
Related Manuals for Spectrum Industries 37310
Summary of Contents for Spectrum Industries 37310
- Page 1 (20) 0101382 Flex Flip Tables #14 x 7/8” PHSM screws 24”D 30”D 1. Attach leg mechanisms 37310 - 48”W 37311 - 48”W 37312 - 60”W 37313 - 60”W 37314 - 72”W 37315 - 72”W 1. Place worksurface face-down onto a non-abrasive surface.
- Page 2 2. Attach legs 1. Set a leg on each leg mechanism. Figure 2. 2. Attach each leg with the included hex screws (4 per leg) and hex wrench. 3. Tighten screws securely. 4. Be sure swivel wheels are tightened securely. (Tighten with 1/2” wrench if necessary.) 5.
- Page 3 Warranty WE WILL MAKE IT RIGHT FOR YOU! Spectrum is committed to provide complete customer satisfaction. Each of our products is manufactured from the best materials available and each product is stringently monitored throughout the production process through our P.A.C.E. program (Product Assurance to meet Customer Expectations). We expressly warrant that Spectrum products will be of good quality and workmanship and free from defect for the period set out in the warranty table below from the date of delivery.
Need help?
Do you have a question about the 37310 and is the answer not in the manual?
Questions and answers