Spectrum Industries 37310 Assembly Instructions

Assembly Instructions:
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for choosing Spectrum products!
(20) 0101382
#14 x 7/8" PHSM Screws
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
1. Attach Leg Mechanisms
A. Place worksurface face-down onto a non-abrasive surface.
B. Orient the leg mechanisms and release handle as shown and align with the
worksurface mounting holes. Figure 1A.
C. Attach the leg mechanisms and release handle to the worksurface using
(20) #14 x 7/8" PHSM screws and tighten securely.
D. Secure the cables to the worksurface with the included clips,
(4) #8 x 3/4" PHSM screws, and pre-drilled holes. Figure 1B.
Attach leg mechanisms to
worksurface with
#14 x 7/8" PHSM screws
Leg Mechanism
Worksurface
Cables
Mounting
holes
Figure 1A
Figure 1B
Flex Flip Tables
24"D
#37310 - 48"W
#37312 - 60"W
#37314 - 72"W
Phillips screwdriver
Hex wrench (included with legs)
1/2" wrench
Leg Mechanism
Release handle
Secure cables with (4) PHSM
screws & cable clips (included
with table legs)
Cable Clip
30"D
#37311 - 48"W
#37313 - 60"W
#37315 - 72"W
Tools Required:
Cable
0108517R2 Page 1 of 3