Detach The Omnicube Bezel - HP SimpliVity OmniCube CN-3400 Installation And Maintenance Manual

Detach the OmniCube bezel

You can detach the OmniCube bezel from the front panel of the system to gain access to the front drives.
Procedure
1. Hold the blue cube handle to detach the bezel and push up on the release latch.
Figure 12: OmniCube Bezel Latch
2. Rotate the left side of the bezel outward from the front panel and pull to the left, to simultaneously
disengage the tabs on the right side of the bezel.
Attach the OmniCube bezel 27