5. Press Enter and select Yes to confirm.
6. Select the other disk group and repeat Step 4 on page 37 and Step 5 on page 38 to delete it.
The disk groups and their virtual disks are deleted.
Change the passphrase for a Security Key
Before you begin
You have completed these tasks:
•
Created a Security Key for the RAID controller on which you want to change the passphrase. See
Create a Security Key on page 34.
•
Obtained the passphrase for the current Security Key.
•
Displayed the PERC BIOS Configuration Utlity on the computer connected to the OmniCube host. See
Access the PERC BIOS Configuration Utility on page 32.
Procedure
1. Select the PERC H730P Mini controller on the Virtual Disk Management screen.
2. Press F2.
3. Select Security Key Management > Change Key.
38
Change the passphrase for a Security Key