HP Carrier-grade cc2300 Installation Instructions Manual
Universal rack mount kit carrier-grade servers (19-23 inch 2- and 4-post racks)
Hide thumbs
Also See for Carrier-grade cc2300:
- Product manual (135 pages) ,
- Safety and regulatory information manual (106 pages) ,
- User manual (41 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for HP Carrier-grade cc2300
Summary of Contents for HP Carrier-grade cc2300
-
Page 1: Installation Instructions
Installation Instructions: HP Universal Rack Mount Kit for hp Carrier-Grade Servers cc2300, cc3300, and cc3310 (19-23 inch 2- and 4-Post Racks) Version 2.0 Manufacturing Part Number: cc3310_RackMount February 2004 U.S.A. © 2003-2004 Hewlett-Packard Development Company, L.P. -
Page 2: Legal Notices
Legal Notices Copyright ã 2003-2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. - Page 3 HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions Introduction These instructions support the following rack types: · 19" 2-post and 4-post racks with EIA Universal and EIA wide hole spacing (use rack mount kit: A6905A) ·...
- Page 4 HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions Figure 1-1. A6905A Rack Mount Kit (for 19" 2-Post and 4-Post racks)
- Page 5 HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions Figure 1-2. A6945A Rack Mount Kit (for 23" 2-Post and 4-Post racks)
-
Page 6: Post-Installation Instructions
HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions 4-Post Installation Instructions Install the rack mount kit components as follows: NOTE Although a cc3300 chassis is shown in the illustrations, these instructions also apply to a cc3310 and cc2300 chassis. - Page 7 HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions Figure 1-4. Front Mounting Bracket Installation 3. Using two 8-32 KEPS nuts per L-bracket, assemble L-brackets* to the outer rail’s four outermost threaded studs. (The A6945A rack mount kit contains both EIA and ETSI L-brackets.) Figure 1-5.
- Page 8 HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions 4. Install the outer rail subassemblies into the rack using ten or twelve (19" or 23" kits, respectively) 10- 32x1/2" SEMS screws. If bar-nuts are used, they should be installed such that all threads are aligned vertically, ensuring the center hole is not skewed with respect to the holes on the rack rail.
- Page 9 HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions 5. Slide the system into the rack making sure the inner rails are captured by the outer rails. Support the weight of the system until the lock features on the inner rails engage with the slot features on the outer rails.
- Page 10 HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions NOTE Once engaged, the lock features must be released to remove the system from the rack. To release the lock features, depress the two latches with the blue arrows (one on either side) downward.
- Page 11 HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions NOTE If installing into a 19-inch 4-post rack that has EIA wide hole spacing, the EIA wide adapter bracket must be used. Install this bracket onto the face of the L-brackets using the same 10- 32x1/2"...
- Page 12 HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions 2-Post Installation Instructions Install the rack mount kit components as follows: NOTE Although a cc3300 chassis is shown in the illustrations, these instructions also apply to a cc3310 and cc2300 chassis.
- Page 13 HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions NOTE The universal front mounting bracket can be flipped in order to locate the system further forward in the rack (see inset). Figure 1-12. Front Mounting Brackets 3.
-
Page 14: Installing The Outer Rails
HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions 4. Install the two outer rail subassemblies in the rack using twelve 10-32x1/2" SEMS screws or other appropriate fasteners. If bar-nuts are used, they should be installed such that all threads are aligned vertically, ensuring the center hole is not skewed with respect to the holes on the rack rail. - Page 15 HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions 5. Slide the system into the rack making sure the inner rails are captured by the outer rails. Support the weight of the system until lock features on the inner rails engage with the slot features on the outer rails.
- Page 16 HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions 6. Install two 10-32X1/2" SEMS screws to hold the universal front mounting bracket to the 2-post mounting bracket. Figure 1-17. Securing the Chassis in the Rack...