Important Safety Instructions; Laser Safety Information - JVC FS-900 User Manual

Important Safety Instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purposes of the grounding-type plug. A ground type plug has two blades and a third grounding
prong. The third prong is provided for your safety. If the provided plug does not fit in to your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinching particularly at plugs, convenience receptacles, and point where they
exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
Throughout this manual, a number of warning and caution notes may be presented to alert the user to important safety or
operating information. Please read and comply with any and all warning and caution notes in this manual.
!
Warnings indicate danger that requires proper procedures or practices to prevent injury or
death to personnel.
!
Cautions indicate proper procedures or practices to prevent damage to equipment or
property.
Warning – The safe operation of this product requires that a protective earth connection be provid-
!
ed. A grounding conductor in the equipment's mains supply cord provides this protective earth. To
reduce the risk of electrical shock to the operator and service personnel, this ground conductor must
be connected to an earthed ground. The mains plug shall remain readily operable.
4
Always adhere to local building, safety and fire prevention codes during the installation and operation of this product.
Use only power cords specified for this product and certified for the country of use.
Connect the unit only to a power source with the specified voltage rating.
Use only fuses of the type and rating specified.
In case of an emergency ensure that power is disconnected.
!
Warning – The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
This symbol on the equipment indicates for use at altitudes not exceeding 2000 m.
<2000m

Laser Safety Information

This unit is classified as a CLASS 1 LASER PRODUCT according to EN60825-1 (EU) and FDA 21CFR 1040.10 (USA). Class 1
laser products are considered safe and do not result in biological hazard if used according to these instructions.
CLASS 1
LASER PRODUCTS
LASER KLASSE 1
PRODUKT
!
Warning – Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
!
Warning – Never look directly into the end of the optical fiber while either end of the system
is operating.
!
Warning – Never clean an optical fiber connector on equipment or cable that is carrying light.
!
Warning – Always use dust caps on fiber optic connectors when cables are not connected. This will
protect the connector from damage and accidental exposure of a human eye to an operating laser.
5