System Tools; Smtp Setting - Xiamen Maxincom Technologies MUC1004 Administrator's Manual

3.12 System tools

3.12.1 SMTP Setting

To send the SMS or system alert to email address, please configure the Email
settings first, and make sure SMTP test is successful.
Parameters
Username
Password
SMTP Server
SSL
Port
Use SSL/TLS to
send secure
message to server
Http://www.maxincom.com
Figure 3.12.1
Table 3.12.1
The E-mail Address that MUC1004 will use to send voice
mail.
The password for the email address used above
The IP address or hostname of an SMTP server that the
MUC1004 will connect to in order to send voice mail
messages via email, i.e.mail.yourcompany.com.
If the server of sending email needs to authenticate the
sender, you need to enable this.
Note: Must be selected for Gmail or exchange server.
SMTP Port: the default value is 25.
If the server of sending email needs to authenticate the
sender, you need to enable this.
Note: Must be selected for Gmail or exchange server.
MUC1004 Administrator guide
Description
77 / 80