Blacklist - Xiamen Maxincom Technologies MUC1004 Administrator's Manual

MUC1004 Administrator guide
This function is mainly used for the connection of two branches.
For example: Company A locates headquarters in the USA with a branch B in
China. A and B both have a MUC1004 phone system.
Now if staff of A would like to make a call to a telephone or mobile phone in
China from the extension of A but via the FXS line of B, that can be done by
this configuration.
·Non-office Hours Destination
Configure where to route the incoming calls during non-office hours.
4) Holidays Settings
Define where the calls will be routed during Holidays.
·Holiday Mode
Select which defined Holiday to use.
None: Disable holiday for this route.
Gloal holiday: It is configured through general preferences.
Specific holiday: Use the holiday settings.
·Holiday Destination
Configure where to route the incoming calls during holidays.

3.7.2 Blacklist

Blacklist is used to block an incoming/outgoing call. If the number of
incoming/outgoing call is listed in the number blacklist, the caller will hear the
following prompt: "The number you have dialed is not in service. Please check
the number and try again". The system will then disconnect the call.
Figure 3-7-2 Blacklist
We can add a number to blacklist
Figure 3-7-2a Blacklist Add
Http://www.maxincom.com
45 / 80