Table of Contents
Advertisement
Frequency
Detection
Busy Frequency
Hangup Polarity
Reversal Detection
3.5.2 IP Trunk
peer to peer mode)
(
Parameters
IP Trunk
Add remote IP of Softswitch, SIP server which will send call
traffics to gateway.
Trunk Name
It describes the trunk for the ease of identification.
Type
Choose the type of this trunk, SIP or IAX
Outbound
Caller ID for calls placed on out this trunk
Caller ID
Hostname/IP
Service provider's hostname or IP address,5060 is the
Address
standard port number used by SIP protocol. Don't change
this part if it is not required.
Http://www.maxincom.com
Used for Frequency Detection (Enable detecting the busy
signal frequency or not).
If the Frequency Detection is enabled, you must specify
the local frequency.
The call will be considered as "hang up" on a polarity
reversal.
Figure 3-5-2 IP Trunk
Figure 3-5-2a Add IP Trunk
Table 3-8-2 Description of IP Trunk
Description
MUC1004 Administrator guide
23 / 80
Advertisement
Table of Contents
