Callback - Xiamen Maxincom Technologies MUC1004 Administrator's Manual

MUC1004 Administrator guide

3.7.7 Callback

MUC1004 allows caller A to dial an inbound route number, and after hearing
the ring, A can hang up the call or wait for MUC1004 to cut off the call, then
MUC1004 will call A with this number. When A picks up the call, A can dial the
number he wants to call; MUC1004 will call the number with its outbound
route.
Notes:
1. If you'd like to use callback feature, please make sure it's enabled on the
inbound route setting panel.
2. No callback rules needed to be set if the trunk supports call back with the
caller ID directly.
Figure 3-7-7 Callback
Follow the steps below to use this function.
Step 1: Enable Callback.
Inbound Routes—Choose "Yes" on" Enable Callback" to enable this function.
Step 2: Create Callback number.
Figure 3-7-7 Callback Edit/Add
Http://www.maxincom.com
56 / 80