Table of Contents
Advertisement
Parameters
Time zone
Primary server
Secondary server
Synchronism
Daylight Saving Time Set the mode to Automatic or disabled
3.10.7 Factory reset
Be careful do this operation, after restore factory setting, all the parameters
will be changed to the factory default.
Reset to Factory Defaults
Click this button to reset Factory Default settings
Http://www.maxincom.com
Table 3.10.6 Time & Date parameter
You can choose your time zone here.
Primary NTP Server Address
Secondary NTP Server Address
Set the time interval for checking local appliance's
time with the server
Figure 3.10.7 factory reset
MUC1004 Administrator guide
Description
74 / 80
Advertisement
Table of Contents
