Table of Contents
Advertisement
MUC1004 Administrator guide
Figure 3.10.1b Firewall Defence Edit/Add
3.10.2 Firmware update
Upgrading of the firmware is possible through the Administrator Web
interface using a TFTP Server or an Upload
Enter your TFTP Server IP address and firmware file location, then click start
to update the firmware
Notes:
1. If enabled "Reset configuration to Factory Defaults", System will
restore to factory default settings.
2. When update the firmware, please don't turn off the power. Or the
system will get damaged.
Figure 3.10.2
Http://www.maxincom.com
71 / 80
Advertisement
Table of Contents
