Table of Contents
Advertisement
Table 3-4-2 Description of VLAN Configuration
Parameter
NO.1
Click the NO.1 you can edit the first VLAN over LAN
IP Address
Set the IP Address for MUC1004 VLAN over LAN.
Subnet Mask
Set the Subnet Mask for MUC1004 VLAN over LAN.
Gateway
Set the Default Gateway for MUC1004 VLAN over LAN
3.4.3 ARP
The ARP function is mainly used to query and add the map of IP and MAC.
There are static or dynamic ARP entries.
Like other routers, the gateway can automatically find the network device on
the same segment. But, sometimes you don't want to use this automatic
mapping, you'd rather have fixed (static) associations between an IP address
Http://www.maxincom.com
MUC1004 Administrator guide
Description
16 / 80
Advertisement
Table of Contents
