Table of Contents
Advertisement
MUC1004 Administrator guide
·PIN Set
Optional: select a PIN set to use.If using this option,leave the password field
blank
·Response Timeout
The maximum amount of time the system will wait before hanging up the call
if the user has dialed an incomplete or invalid number. The default is 10
seconds.
·Digit Timeout
The maximum amount of time permitted between each digit when the user is
dialing an extension number. The default is 5 seconds.
·Allow Outbound Routes
Used to set the outbound routes that can be accessed from this DISA.
3.8.5 Paging and Intercom
Paging is used to make an announcement over the speakerphone to a phone
or group of phones. Targeted phones will not ring, but instead answer
immediately into speakerphone mode. Please note that this section is for
configuring paging groups. If you would like to configure Intercom settings,
please open the PBX Basic -> Feature Codes screen.
Note: A paging group can have a maximum of 20 members.
Figure 3.8.5 Paging and Intercom
Figure 3.8.5a Paging and Intercom Edit/Add
Http://www.maxincom.com
65 / 80
Advertisement
Table of Contents
