Wall Mounting - Alcatel-Lucent OA5720 Installation Manual

Alcatel-Lucent Enterprise
Make sure there is enough space around the router (for ventilation purposes) and check that the electricity cables
can reach it.

3.3.2 Wall mounting

The OA5720 can be mounted on the wall. This optional kit can be ordered together with the OA5720, or separately.
The anchors to mount the device on the wall must be installed as shown in the following figure, using the screws
provided by the manufacturer.
Wall-mounting
Fig. 12:
Once the anchors have been placed, you can place the device on the wall as shown in the upper right hand figure.
Warning
The screws must go into a wall stud (wood) or a wall anchor of the appropriate type for the wall. Screws
into drywall are not strong enough to mount the router.
The above figures show the wall-mounting features on the OA5720 router.
Wall-mounting elements
Item
1
2
3
4
5
(1) Install the two (or four) wall studs horizontally and separately in a wall or any other vertical surface.
(2) Place the router on the wall and attach it using the screws (3.5x30). The figure shows how to install it correctly
OA5720 Router
Description
Wall screws
23.2 cm (9.13 inches)
Chassis mounting holes
Router chassis
Mounting surface
Warning
If you install the router in drywall, use hollow-wall anchors (8mm - 5/16 inch) to secure the screws.
If the screws are not properly anchored, the strain of the cables connected to the router back pan-
el could pull the router from the wall.
3 Components and Power Supply
11