Barring Incoming Calls (Caller Id Service Users Only) - Panasonic KX-HDV130 Operating Instructions Manual

4.7 Barring Incoming Calls (Caller ID
4.7 Barring Incoming Calls (Caller ID
users only)
This feature allows the unit to reject calls from specified phone numbers that you do not want to answer
such as junk calls.
When a call is received, the unit does not ring while the caller is being identified.
If the phone number matches an entry in the call barred list, the unit rejects the call.
If an outside call that contains Caller ID information (a caller's name and telephone number) is received, this information will be
*1
logged in the incoming call log and displayed on the LCD.
If a call from a number matching a number entered in the phonebook is received, the name registered in the phonebook for that
number will be displayed along with the number.
If caller information is sent by the phone system and there is also information stored in the phonebook for the same number, the
information stored in the phonebook will be displayed.
Note
•
A password may be required for these settings. We recommend setting with your administrator.
Contact your administrator for further information.
Storing unwanted callers
You can store up to 30 phone numbers in the call barred list by using the caller list or by entering the
numbers directly.
1.
Press .
Menu
2.
Press [▲] or [▼] to select "Basic Settings", and then press
3.
Press [▲] or [▼] to select "Call Settings", and then press
4.
Press [▲] or [▼] to select "Block Caller ID", and then press
5.
Press [▲] or [▼] to select a blank line, and then press
6.
Press [▲] or [▼] to select "Edit", and then press
7.
Enter the phone number (max. 32 digits), and then press
8.
Press .
Save
Note
•
You can also register a phone number by pressing
who you want to block is selected on the incoming call log list and continuing the procedure from step
7.
Editing the phone numbers to reject
1.
Press .
Menu
2.
Press [▲] or [▼] to select "Basic Settings", and then press
3.
Press [▲] or [▼] to select "Call Settings", and then press
4.
Press [▲] or [▼] to select "Block Caller ID", and then press
5.
Press [▲] or [▼] to select a desired phone number, and then press
6.
Press [▲] or [▼] to select "Edit", and then press
7.
Enter the phone number, and then press
80 Operating Instructions
service users only)
*1
OK
OK
.
OK
*1
.
OK
.
OK
.
OK
.
Menu
.
.
OK
and selecting "Block Caller ID" when a caller
Menu
.
OK
.
OK
.
OK
.
Menu
.
service
Document Version: 2017-08