5.7 Wall mounting template
5.7 Wall mounting template
1.
Drive the screws into the wall as indicated.
2.
Hook the unit onto the screw heads.
Note
•
Make sure to set the print size to correspond with the size of this page. If the dimensions of the paper
output still deviate slightly from the measurements indicated here, use the measurements indicated
here.
5.7.1 KX-HDV130
110
Operating Instructions
*1
*3
*1
One screw here
*1
100 mm (3 15/16 in)
*2
83 mm (3 1/4 in)
*3
Document Version: 2017-08