Panasonic KX-HDV130 Operating Instructions Manual page 93

System Settings
Sub Item
Set Time & Date
*1
Authentication
*2
Access Code
*4
Xsi Setting
*5
UC Setting
*5
Restart
DSS Restart
*6
Availability depends on your phone system. When the power supply is cut off due to a power outage or other reasons or after the
*1
unit is restarted, a reconfiguration will be necessary as the current setting values are deleted. Therefore, it is recommended to use
the NTP server. Contact your administrator for further information.
The administrator password may be required for this setting. Contact your administrator for further information. For available
*2
characters, see "5.2 Character Table for Administrator Password".
Max. 128 characters
*3
This setting may not be displayed depending on the settings of this unit. Contact your administrator for further information.
*4
This item is displayed only when the feature is enabled. Contact your administrator for further information.
*5
KX-HDV230 only
*6
Document Version: 2017-08
Description
Specifies the time and
date of the telephone.
Specifies the ID and
password for HTTP
authentication.
Specifies the access
code to access the
redirect server.
Specifies the ID and
password for the Xsi
service.
Specifies the ID and
password for the
Broadsoft UC service
(IM&P).
Restart the unit.
Restart any connected
DSS units.
Setting
—
ID
*3
Password
*3
Max. 16 characters
For KX-HDV130: ID
Line 1–Line 2 Password
For KX-HDV230:
Line 1–Line 6
ID
*3
Password
*3
Yes / No
Yes / No
4.10.1 System Settings Menu Layout
—
Not stored
Not stored
Not stored
*3
*3
Not stored
No
No
Operating Instructions
Default
93