Bosch CL200 User Manual page 85

Addressing
1070 072 145-102 (01.07) GB
Power circuit A
Power circuit B
Using a suitable tool, extract fuse F1 or F2 from socket, then insert new 3.0 A
L
FF fuse. The fuse is supplied complete with fuse holder.
Insert module in module rack, and push home firmly.
L
Reconnect push-lock terminals.
L
Switch ON power supply.
L
A start address for each module must be set on the S1 DIP switch:
Digital Output Modules
F2
F1
S1 DIP switch
S1 Start address
W
B
Jumper only on A24V– (16-way),
Pos. W = Word consistency
Pos. B = Byte consistency
(Factory setting)
Jumper must be in place
7–3