Bosch CL200 User Manual page 42

NT200 Power Supply Module
4–4
PG Mode LED
Copy / Stop / Run switch/button
Stop LED
5V / 7.5V LED
X10 connector
.
Refer to Chapter 5, Central Processing Unit, section 5.2, Display and
Control Elements
.
Refer to Chapter 5, Central Processing Unit, section 5.2, Display and
Control Elements
.
Refer to Chapter 5,Central Processing Unit, section 5.2, Display and
Control Elements
When this LED illuminates, the 5 V and /.5 V supply voltages for central pro-
cessing unit and periphery modules are present.
The X10 connector comprises the terminal for the 24 V power (form factor
5.08).
1070 072 145-102 (01.07) GB