ComAp IG-NT Reference Manual page 327

Binary output: StartButnEcho
Related FW 3.0
Description This output provides 1s pulse when:
Binary output: StopButnEcho
Related FW 3.0
Description This output provides 1s pulse when:
Binary output: MCBButnEcho
Related FW 3.0
Description This output provides 1s pulse when:
Binary output: GCBButnEcho
Related FW 3.0
Description This output provides 1s pulse when:
IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF

the input HornResButton

Start button is pressed on the controller front panel or

Start button is pressed on any of external local/remote terminals or

start command is received via communication line or

the input StartButton

Stop button is pressed on the controller front panel or

Stop button is pressed on any of external local/remote terminals or

stop command is received via communication line or

the input StopButton

MCB button is pressed on the controller front panel or

MCB button is pressed on any of external local/remote terminals or

MCB close/open command is received via communication line or

the input MCBButton

GCB button is pressed on the controller front panel or

GCB button is pressed on any of external local/remote terminals or

GCB close/open command is received via communication line or

the input GCBButton
is activated.
is activated.
is activated.
is activated.
is activated.
327