Cooling System And Airflow; Cooling System And Airflow In An Mx150; Figure 8: Front-To-Back Airflow Through The Mx150 Chassis - Juniper MX150 Hardware Manual

CHAPTER 3

Cooling System and Airflow

Cooling System and Airflow in an MX150

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Cooling System and Airflow in an MX150 on page 13
The MX150 has front-to-back airflow. The air intake to cool the chassis is located at the
front of the chassis. Air is pulled into the chassis and pushed toward the fans, which are
built-in. Hot air exhausts from the rear of the chassis. See

Figure 8: Front-to-Back Airflow Through the MX150 Chassis

Rear Panel of an MX150 on page 6
Prevention of Electrostatic Discharge Damage on page 151
Figure 8 on page 13.
13