Microlife WatchBP Office ABI Instruction Manual page 18

Taking measurements using WatchBP Office ABI (cont.)
5) Press the M Button to switch between left(L) and
right(R). Press the Start/Stop Button to save the
setting.
ROUTINE
6) Start measurements – Press the Start/Stop
Button to start the measurements.
15-second
countdown...
20
7) Three consecutive measurements –
ROUTINE
8) Inflation by fuzzy logic – The device will adjust
9) The average value of the measurements–
ROUTINE
*
The device will take three consecutive
measurements with 15 second intervals in
between on default.
1
15
seconds
inflation pressure by fuzzy logic technology.
The average values will be displayed when the
measurements are completed and will be saved
to the memory automatically.
The user can manually set the measurement intervals
of 15, 30, 45 or 60 seconds in ROUTINE Mode. (Please
refer to special functions section page 19 "Setting up
measurement intervals")
3
2
15
seconds