Routine» Mode - Microlife WatchBP Office ABI Instruction Manual

«ROUTINE» Mode
1) Turn on the power – Turn on the device by
switching the I/O switch at the back of the device
to the ON position.
DC 7.5V 2.0A
2) Apply the cuff – Properly fit one cuff to the
preferred measurement arm.
Additional visual instruction can be found on the cuff
*
DC 7.5V 2.0A
3) Switch to «ROUTINE» Mode – Slide the Mode
Switch to «ROUTINE» Mode.
ABI ROUTINE SCREEN
4) Select the inflation cuff – Set the device to
the preffered measurement side (left or right).
Press and hold the M Button for 3 seconds.
ABI ROUTINE SCREEN
Press and hold
for 3 seconds...
ABI RO
19
EN