Microlife WatchBP Office ABI Instruction Manual page 16

Taking measurements using WatchBP Office ABI (cont.)
5) Start measurements – Press the Start/Stop
Button to start the measurement sequence.
A 60-second countdown will proceed the first
*
measurement .
SCREEN
60-second
countdown...
6) Three consecutive measurements – The device
will take three consecutive measurements with
one minute intervals between measurements.
1
60
seconds
18
SCREEN
2
60
seconds
7) The average value of the measurements –
The average value will be displayed after the
measurements.
If one of the three measurements failed, a
fourth measurement will be conducted.
SCREEN
If the third measurements are cancelled by pressing
*
the Start/Stop after the second measurement, the
averages are calculated and saved to the memory as
well.
3
Please refer to special functions section page 18
*
"Taking less than three measurements"
SCREEN