Advanced Internet Connection - ZyXEL Communications AMG1312-T10D User Manual

Chapter 5 WAN Setup
Table 3 Network Setting > Broadband >Internet Connection (continued)
LABEL
Mode
Remote IPv6
Address
IPv6 Address
Prefix Length
IPv6 Default Gateway
IPv6 DNS Server1
IPv6 DNS Server2
WAN Identifier Type
WAN Identifier
Connection (PPPoA and PPPoE encapsulation only)
Keep Alive
Connect on Demand
Max Idle Time
Apply
Cancel
Advanced Setup

5.2.1 Advanced Internet Connection

Use this screen to edit your Device's advanced WAN settings. Click the Advanced Setup button in
the Internet Connection screen. The screen appears as shown.
38
DESCRIPTION
Select Manual if you have the IPv6 address of the Address Family Transition Router
(AFTR), otherwise select Auto to have the Device detect it automatically through
DHCPv6.
When you set the Mode field to Manual, specify the AFTR IPv6 address.
When you enable Static IP Address, enter the IPv6 address of the Device in the
WAN.
When you enable Static IP Address, enter the IPv6 prefix length in the WAN here.
When you enable Static IP Address, enter the IPv6 address of the default gateway
here.
When you enable Static IP Address, enter the primary DNS server IPv6 address
here.
When you enable Static IP Address, enter the secondary DNS server IPv6 address
here.
Select Manual to manually enter a WAN Identifier as the interface ID to identify the
WAN interface. The Device appends the WAN Identifier to the IPv6 address prefix to
create the routable global IPv6 address. Select EUI64 to use the EUI-64 format to
generate an interface ID from the MAC address of the WAN interface.
If you selected Manual, enter the WAN Identifier in this field. The WAN identifier
should be unique and 64 bits in hexadecimal form. Every 16 bit block should be
separated by a colon as in XXXX:XXXX:XXXX:XXXX where X represents a
hexadecimal character. Blocks of zeros can be represented with double colons as in
XXXX:XXXX::XXXX.
Select Keep Alive when you want your connection up all the time. The Device will
try to bring up the connection automatically if it disconnects.
Select Connect on Demand when you don't want the connection up all the time and
specify an idle time-out in the Max Idle Timeout field.
Specify an idle time-out in the Max Idle Timeout field when you select Connect on
Demand. The default setting of 0 means the Internet session will not timeout.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to display the Advanced Internet Connection section and edit more
details of your WAN setup.
AMG1312-T10D User's Guide