ZyXEL Communications AMG1312-T10D User Manual page 197

Figure 141 Maintenance > Remote MGMT > SNMP
The following table describes the labels in this screen.
Table 88 Maintenance > Remote MGMT > SNMP
LABEL
Server Port
Server Access
Secured Client IP
Address
Get Community
Set Community
Trap Community
IPv4 Trap
Destination
IPv6 Trap
Destination
AMG1312-T10D User's Guide
DESCRIPTION
This displays the port the SNMP agent listens on. If the number is grayed out, it is not
editable.
Select the interfaces through which a computer may access the Device using this service.
A secured client is a "trusted" computer that is allowed to access the SNMP agent on the
Device.
Select All to allow any computer to access the SNMP agent.
Choose Range to just allow the computers with an IP address in the range that you
specify to access the Device using this service.
Enter the Get Community, which is the password for the incoming Get and GetNext
requests from the management station. The default is public and allows all requests.
Enter the Set community, which is the password for incoming Set requests from the
management station. The default is public and allows all requests.
Type the trap community, which is the password sent with each trap to the SNMP
manager. The default is public and allows all requests.
Type the IPv4 IP address of the station to send your SNMP traps to.
Type the IPv6 IP address of the station to send your SNMP traps to.
Chapter 25 Remote Management
197