ZyXEL Communications AMG1312-T10D User Manual page 42

Chapter 5 WAN Setup
Figure 22 More Connections: Edit
The following table describes the labels in this screen.
Table 6 More Connections: Edit
LABEL
General
Active
Node Name
Mode
Encapsulation
User Name
Password
42
DESCRIPTION
Select the check box to activate or clear the check box to deactivate this connection.
Enter a unique, descriptive name of up to 13 ASCII characters for this connection.
Select Router from the drop-down list box if your ISP allows multiple computers to share
an Internet account.
If you select Bridge, the Device will forward any packet that it does not route to this
remote node; otherwise, the packets are discarded.
Select the method of encapsulation used by your ISP from the drop-down list box. This
field is available if you select Router in the Mode field.
(PPPoA and PPPoE encapsulation only) Enter the user name exactly as your ISP assigned.
If assigned a name in the form user@domain where domain identifies a service name,
then enter both components exactly as given.
(PPPoA and PPPoE encapsulation only) Enter the password associated with the user name
above.
AMG1312-T10D User's Guide