Setup/Service - McQuay MicroTech II Operation Manual

Table 6: Schedules Menus (Continued)
Menu Name
Holiday Schedule
Optimal Start

Setup/Service

Menus in the Setup/Service category contain status and con-
trol parameters that relate to the setup and service of the unit.
Parameters in these menus are generally the type that are set
at the factory and might be adjusted when the equipment is
started up and generally do not required further adjustment.
Table 7 on page 35 lists all menus and items in the
Setup/Service group or category. The "Range" column in the
table lists all possible values for each item. The factory set-
tings for the adjustable parameters are shown in the "Factory
Default Value" column. The following are brief descriptions
of the Setup/Service category menus and items.
Unit Configuration
The Unit Configuration menu contains parameters that
define various basic unit configuration attributes.
AHU ID. AHU ID= is a status only item which identifies the
version of application software loaded into the unit main
control board (MCB) Refer to "Software Identification and
Configuration" on page 102.
26
Menu Item Name Factory Default Value
Hol 1
Hol 2 Same As Hol 1
Hol 3 Same As Hol 1
Hol 4 Same As Hol 1
Hol 5 Same As Hol 1
Hol 6 Same As Hol 1
Hol 7 Same As Hol 1
Hol 8 Same As Hol 1
Hol 9 Same As Hol 1
Hol 10 Same As Hol 1
Hol 11 Same As Hol 1
Hol 12 Same As Hol 1
Hol 13 Same As Hol 1
Hol 14 Same As Hol 1
Hol 15 Same As Hol 1
Hol 16 Same As Hol 1
Space Temp
Optimal Start
Auto Update
Htg Rate
Htg OAT
Htg Zero OAT
Clg Rate
Clg OAT
Clg Zero OAT
Field Number
N/A-N/A
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
-
No
Yes
0.4 °F/min
35 °F
0 °F
0.4 °F/min
85 °F
100 °F
CompB1 ID. CompB1 ID= is a status only item which
identifies the version of the application software loaded into
compressor control board #1 (CCB1) on a unit equipped
with compressorized cooling. Refer to "Software Identifica-
tion and Configuration" on page 102.
CompB2 ID. CompB2 ID= is a status only item which
identifies the version of the application software loaded into
compressor control board #2 (CCB2) on a unit equipped
with compressorized cooling. Refer to "Software Identifica-
tion and Configuration" on page 102.
GenCB ID. GenCB ID= is a status only item which identi-
fies the version of the application software loaded into the
generic condenser control board (CCB1) on a unit equipped
with a DX cooling coil and interfaced with a field supplied
condensing unit. Refer to "Software Identification and Con-
figuration" on page 102.
HtgB ID. HtgB ID= is a status only item which identifies
the version of the application software loaded into the elec-
tric heat control board (EHB1) on a unit equipped with mul-
Range
1 Jan-Dec
2 01-31
3 Jan-Dec
4 01-31
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
Same As Hol 1
- -50 - 250.0 °F
No
1
Yes
No
1
Yes
1 0-1 °F/min
1 0 - 255 °F
1 -40 - 60 °F
1 0-1 °F/min
1 0 - 255 °F
1 60 - 140 °F
OM 138