Telephone operation
Telephone basic operation
To make a call with a corded headset:
Make sure a corded headset is connected to the console (page 16).
1.
Press HEADSET on the console.
2.
Wait for a dial tone, then dial the number.
3.
To hang up, press HEADSET.
To make a call with a cordless headset:
You can make a call using a registered cordless headset and the dial pad on
the console.
1.
Press the ON
/OFF
2.
Wait for a dial tone, then dial the number on the base.
3.
To hang up, press the
On hook dialing (predialing)
1.
Enter the telephone number. Press DELETE to make corrections.
2.
Lift the handset or press
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, then lift the handset.
Using the speakerphone
During a call, press
and normal handset use. Press
the console to hang up.
Answering a call
To answer a call:
•
Lift the handset, press
registered cordless headset.
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, then lift the handset.
Temporary ringer silencing
Press MUTE while the telephone is ringing to silence the ringer temporarily
on the console only. This turns off the ringer without disconnecting the call.
The next incoming call rings normally at the preset volume.
button on the cordless headset.
the
OFF button.
ON/
SPEAKER to dial.
SPEAKER to switch between handsfree speakerphone
SPEAKER again or place the handset on
SPEAKER, HEADSET or the ON
41
button on a
/OFF