Dial Mode; Auto-Mute - AT&T MS2085 User Manual

Telephone settings
Telephone setup

Dial mode

The dial mode is preset to tone dialing. If you have
pulse (rotary) service, you must change the dial mode
to pulse dialing before using the telephone.
1. When the console is idle, press MENU
2. Press or to scroll to Phone Settings then press
SELECT.
MENU/
3. Press or to scroll to Tone/Pulse then press
SELECT.
MENU/
4. Press or to choose Tone or Pulse.
5. Press SELECT to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press CANCEL.

AUTO-MUTE

Use this feature to choose whether a page will
broadcast on your console when you receive a page.
If you set AUTO-MUTE to Off, you can hear on the
console when you receive a page. If you set
AUTO-MUTE to On, the MUTE light turns on, and a
page is muted when you receive a page, unless you
press MUTE to unmute the page.
1. When the console is idle, press MENU
2. Press or to scroll to Phone Settings then press
SELECT.
MENU/
3. Press or to scroll to AUTO-MUTE then press
SELECT.
MENU/
4. Press or to choose On or Off.
5. Press SELECT to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press CANCEL.
.
/SELECT
.
/SELECT
37
L1 L2 L3 L4
Phone Settings
LCD Language
Area Codes
Key Tone
LCD Contrast
>Tone/Pulse
AUTO-MUTE
L1 L2 L3 L4
Tone/Pulse
>Tone
Pulse
L1 L2 L3 L4
Phone Settings
LCD Language
Area Codes
Key Tone
LCD Contrast
Tone/Pulse
>AUTO-MUTE
L1 L2 L3 L4
AUTO-MUTE
>On
Off