Table of Contents
Advertisement
Telephone operation
Telephone operation
The telephone comes programmed to select the line automatically for calls
when you do not press a line key. To override the automatic line selection
setting, see Prime line on page 10 for details. When you answer a call, the
telephone automatically selects the ringing line.
Making and ending a call
To make a call using the console:
1.
Lift the handset or press SPEAKER
-OR-
To override automatic line selection, press LINE 1-
LINE 4 for the desired line, then lift the handset.
2. Wait for a dial tone, then enter the telephone number.
The screen displays the elapsed time as you talk (in
hours, minutes and seconds).
To end a call using the console:
•
Place the handset on the console to hang up.
-OR-
•
Press the corresponding line key (LINE 1-LINE 4).
-OR-
If you are using the speakerphone, press SPEAKER
•
NOTE: The elapsed time is not affected by accessing services from your telephone
service provider.
On hook dialing (predialing)
Enter the telephone number. Press DELETE to make corrections.
1.
2.
Lift the handset or press SPEAKER
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, then lift the handset.
Answering a call
Lift the handset, or press the corresponding line key (LINE 1-LINE 4),
SPEAKER
, HEADSET or the ON
headset to answer an incoming call.
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the
console without disconnecting the call. Press MUTE to silence the ringer. The
next call rings normally at the preset volume.
.
to dial.
button on a registered cordless
/OFF
13
L1
PRIV
Line 1 00:00:01
to hang up.
Advertisement
Table of Contents
