Disassembling Your Scooter - CareCo MS01080 User's Setup Manual

Disassembling Your Scooter

1
Seat Disassembling
Remove seat by lifting Seat Rotation
Lever (J). Then rotate Seat (K) and lift up
away from scooter.
K
!
When assembling the Battery Pack (T), make sure the battery terminals are properly connected.
Front & Rear Frame
3
Disassembling
Hold front and rear frame and
pull the Release Lever (T) to
disassemble front and rear frame.
4
Tiller Fold Method
Turn the Cap (I) to fold down the Tiller (U) to the lowest position
as shown in Figure 18. When the Tiller (U) is in the lowest
position it can be locked by the tiller angle adjustment pin.
I
www.careco.co.uk
Valour - Travel Mobility Scooter
As indicated, pull Battery Pack Handle (R) to
remove Battery Box (S) from scooter. Caution :
Battery Box is heavy. When lifting, please use
correct lifting posture to avoid injury. Ask for
assistance if necessary.
J
U
CareCo, Hubert Road, Brentwood, Essex, CM14 4JE
2
Battery Pack Disassembling
R
S
K
5
Completing Disassembly
The Scooter can be disassembled
into 7 main parts as shown below.
!
T
Reassemble your
scooter by reversing the
above instructions.
08