How To Transfer Files; Configure Usb Connection And Transfer Files - Honeywell Dolphin CT40 Series User Manual

How to Transfer Files

To transfer files you need to physically connect the CT40 mobile computer to your
workstation (e.g., laptop or desktop computer) through a USB connection.
When the mobile computer is connected and USB is configured for file or photo
transfer, use a file browser (e.g., File Explorer or Windows Explorer) on your
workstation to transfer files between the two computers. If you are transferring files
to and from a Mac, use the Android File Transfer application (available from
www.android.com/filetransfer).
Note: File transfer through a USB connection is disabled by default. You need to configure
the USB connection for transferring files or photos.
You can use these accessories to connect your mobile computer to your
workstation:
•
•

Configure USB Connection and Transfer Files

Note: The CT40 supports Hi-Speed USB communications (USB 2.0) with a maximum data
transfer rate of 480 Mbps.
1. Connect the CT40 to your workstation.
2. On the CT40, swipe down from the top of the screen to see the notifications.
3. Tap Android System notification twice, to open the options menu.
4. Select either File Transfer or PTP.
5. Open the file browser on your workstation.
6. Browse to the CT40. You can now copy, delete, or move files between the CT40
Dolphin CT40 Mobile Computer
Home Base or Ethernet Home Base, and a standard USB Type B to A cable.
Snap-On Adapter, Tethered USB Cable Client (CT40-SN-USB-0).
and your workstation.
19