Register Your Warranty; Enable Your Sawgear - SawGear SGTAB04 Manual

Connecting the Flipaway Stop
Tighten until the flipaway stop can hold it's position when flipped up.

Register Your Warranty

When your new SawGear arrives, you will find a warranty registration sheet in the accessory
box.
Fill out this form and fax it to TigerStop Customer Service at
(360) 260-0755.
TigerStop Customer Service will contact you by phone to give
you the enable code, within the hour during regular business
hours, (360) 448-6102 Mon-Fri 6am~4pm PST
(West Coast), or the next business day if faxed after 4:00 P.M.

Enable Your SawGear

To use your SawGear, you have to enable it! Your SawGear
warranty begins on the day that your SawGear is enabled!
1. Power SawGear ON using the button on the keypad.
2. The screen displays "SN=# Enter enable code, call TigerStop".
3. When you receive the enable code from TigerStop, enter the number, and press [Start] to
load it.
8
4